SEON Trooper TR9 Uživatelská příručka stáhnout pdf (Strana 10)

Alarm Harness

Black: Alarm switch –

The alarm harness is used to trigger the recording of an alarm event and to increase the

recording quality and speed for a configurable time period after the alarm. The

recorded alarm event can be used during video playback to quickly search for important

incidents.

Connect the red wire to the black wire (or to ground) through a normally open alarm

switch. Use the vehicle’s silent alarm switch if possible.

See the

Record Menu on page 24 of this manual for configuration details and Video

on page 16 for alarm search details.

Vehicle Signal Harness

NOTE: Always connect the vehicle signal inputs to a fuse-protected circuit.

Each input can be configured to display the status text when the signal is 12 VDC

(active high – default setting) or grounded (active low). The default text shown above

for each input can be changed. See the Signal/Speed/GPS Menu on page 25 of this

manual for configuring details.

CAN (SAE-J1939) Signal Harness

The CAN vehicle data interface (SAE-J1939 compliant) provides a connection to the

vehicle’s internal CAN data bus. Please contact Seon Design about a custom interface

cable for your vehicle.

Red: Alarm switch +

Black: Ch.1 - LT (Left Turn Signal)

Green: Ch.2 - STP (Stop Arm)

Red: Ch.3 - BRK (Brakes)

White: Ch.5 - RT (Right Turn Signal)

Brown: Ch.4 - WRN (Warning Lights)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Žádné komentáře

SEON Trooper TR9 Uživatelská příručka Strana 10